Bitcoin Core version 0.12.0 released

wallet notification not working for multisig address

Hello Friend. I am new in bitcoin. I started research about bitcoin(Couple of days ago) for my project.I setup bitcoin node on my linux server and it is fully synchronized. here is my bitcoin.conf
prune=600 maxconnections=10 maxuploadtarget=20 rpcuser=XXXXX rpcpassword=XXXXX keypool=100 server=1 rescan=1 alertnotify=php \var\www\html\alert.php %s blocknotify=php \var\www\html\block.php %s walletnotify=php \var\www\html\wallet.php %s 
Case 1: I created address using getnewaddress [account_name] then I sent some BTC from other wallet and I can get wallet notification.
Case 2: I created address using addmultisigaddress command then I sent some BTC from other wallet and I can get wallet notification.
Case 3 : I have created multisig address using createmultisig command. And I sent some BTC from other wallet (Check transaction status https://blockchain.info/tx/199a83f627477e147d38a6f28be323cb3d93d255b4f7ce46abb88c51f52d81b5 ). That transaction have enough confirmation But I can not get wallet notification.
Why i can not getting wallet notification of multisig address (Case 3)?
addmultisigaddress command will save redeemScript and attache it to that address. this is work for me and I can get notification.
So here i also want to know how secure is my multisig address if i create it using addmultisigaddress command? Suppose my server hacked, Attacker easily get redeemscript(using validateaddress command) and also can get sign address associate with it and privet key of that addresses. My BTC can be easly Theft.
Please suggest me the best way to create multisig address or answer me why I am not getting wallet notification of multisig address and what is alternative solution?
Info: I want to develop BTC wallet website where my user can create BTC address and can send and receive BTC. I want to create multisig address for every user. What is best way to create multisig address for them? any security advice welcome.
I searched lots of about this multsig address but I can't get any idea how to implement it (Multisig address using createmultisig command) in my project and wonder how other how other website support multisig address and handle it? Are they using addmultisigaddress command ? If yes then how secure is that account ?
if I can't get wallet notification then how can I credit or debit BTC from my user account (In my project).
Thank you in advance.
submitted by jyorgemakeline to Bitcoin [link] [comments]

Question about LND

I compiled LND from source on Ubuntu 18 and have a full (non-pruned) indexed bitcoind node on the same machine. The setup instructions say to use
lnd --bitcoin.active --bitcoin.testnet --debuglevel=debug --bitcoin.node=bitcoind --bitcoind.rpcuser=xxxx --bitcoind.rpcpass=xxxx --bitcoind.zmqpubrawblock=tcp://127.0.0.1:28332 --bitcoind.zmqpubrawtx=tcp://127.0.0.1:28333 --externalip=xxxx 
However, I didn't use --bitcoin.testnet. I used --bitcoin.mainnet instead. Is that ok? Are there any drawbacks to this? I can confirm that the wallet was created in ~/.lnd/data/chain/bitcoin/mainnet/ Also, my bitcoin.conf file has testnet=0. I haven't done anything else yet.
submitted by 1Tim1_15 to lightningnetwork [link] [comments]

What are recommended bitcoin.conf settings when using c-lightning?

I'm running full (non-pruned) bitcoin core 0.20 on Ubuntu 18. My current bitcoin.conf is:
txindex=1 listenonion=0 server=1 rpcuser=xxx rpcpassword=xxx rpcthreads=1 
If I use c-lightning, what changes do I need to make to the above file? Thanks in advance.
submitted by 1Tim1_15 to lightningnetwork [link] [comments]

Instaling BTC Core - Prune settings help

I am installing BTC Core for the first time on my mac. I am trying to instal the pruned verison.
What I've done is begun the complete installation by default because without there is no directory create on my system. When the installation begun and I had my directory then I accessed it the right way to create the bitcoin.conf file: - Library/Application Support/Bitcoin
Then to the conf file included prune=550 and then restarted the the installation.
Now the estimated time to sync is around the same as when I started without the prune.
Is this the right way to proceed? Is there any way to confirm that now a pruned version is being created?

Thanks for your help and also your understanding that I am a beginner with beginner questions.
submitted by valentinmuller to Bitcoin [link] [comments]

Running a Bitcoin node on a $11.99 SBC

Running a Bitcoin node on a $11.99 SBC
Just wanted to let you guys know that I'm successfully running a (pruned) Bitcoin node + TOR on a $11.99 single board computer (Rock Pi S).
The SBC contains a Rockchip RK3308 Quad A35 64bit processor, 512MB RAM, RJ45 Ethernet and USB2 port and I'm using a 64GB SDCard. It runs a version of Armbian (410MB free). There's a new version available that even gives you 480MB RAM, but I'm waiting for Bitcoin Core 0.19 before upgrading.
To speed things up I decided to run Bitcoin Core on a more powerful device to sync the whole blockchain to an external HDD. After that I made a copy and ran it in pruned mode to end up with the last 5GB of the blockchain. I copied the data to the SD card and ran it on the Rock Pi S. After verifying all blocks it runs very smoothly. Uptime at the moment is 15 days.
I guess you could run a full node as well if you put in a 512GB SDcard.
The Rock Pi S was sold out, but if anybody is interested, they started selling a new batch of Rock Pi S v1.2 from today.
Screenshot of resources being used
Bitcoin Core info
Around 1.5 GB is being transferred every day
---
Some links and a short How to for people that want to give it a try:
  1. This is the place where I bought the Rock Pi S.
  2. Here you find more information about Armbian on the Rock Pi S. Flash it to your SDCard. Follow these instructions.
  3. Disable ZRAM swap on Armbian. If you don't do this eventually Bitcoin Core will crash. nano /etc/default/armbian-zram-config ENABLED=false
  4. Enable SWAP on Armbian sudo fallocate -l 1G /swapfile sudo chmod 600 /swapfile sudo mkswap /swapfile sudo swapon /swapfile sudo swapon --show sudo cp /etc/fstab /etc/fstab.bak echo '/swapfile none swap sw 0 0' | sudo tee -a /etc/fstab
  5. Set up UFW Firewall sudo ufw default deny incoming sudo ufw default allow outgoing sudo ufw allow ssh # we want to allow ssh connections or else we won’t be able to login. sudo ufw allow 8333 # port 8333 is used for bitcoin nodes sudo ufw allow 9051 # port 9051 is used for tor sudo ufw logging on sudo ufw enable sudo ufw status
  6. Add user Satoshi so you don't run the Bitcoin Core as root sudo adduser satoshi --home /home/satoshi --disabled-login sudo passwd satoshi # change passwd sudo usermod -aG sudo satoshi # add user to sudo group
  7. Download (ARM64 version) and install Bitcoin Core Daemon
  8. Download and install TOR (optional). I followed two guides. This one and this one.
  9. Create a bitcoin.conf config file in the .bitcoin directory. Mine looks like this: daemon=1 prune=5000 dbcache=300 maxmempool=250 onlynet=onion proxy=127.0.0.1:9050 bind=127.0.0.1 #Add seed nodes seednode=wxvp2d4rspn7tqyu.onion seednode=bk5ejfe56xakvtkk.onion seednode=bpdlwholl7rnkrkw.onion seednode=hhiv5pnxenvbf4am.onion seednode=4iuf2zac6aq3ndrb.onion seednode=nkf5e6b7pl4jfd4a.onion seednode=xqzfakpeuvrobvpj.onion seednode=tsyvzsqwa2kkf6b2.onion #And/or add some nodes addnode=gyn2vguc35viks2b.onion addnode=kvd44sw7skb5folw.onion addnode=nkf5e6b7pl4jfd4a.onion addnode=yu7sezmixhmyljn4.onion addnode=3ffk7iumtx3cegbi.onion addnode=3nmbbakinewlgdln.onion addnode=4j77gihpokxu2kj4.onion addnode=5at7sq5nm76xijkd.onion addnode=77mx2jsxaoyesz2p.onion addnode=7g7j54btiaxhtsiy.onion ddnode=a6obdgzn67l7exu3.onion
  10. Start Bitcoin Daemon with the command bitcoind -listenonion
Please note that I'm not a professional. So if anything above is not 100% correct, let me know and I will change it, but this is my setup at the moment.
submitted by haste18 to Bitcoin [link] [comments]

Solve the "storage, mining pool and exchange centralization", and only generate 1G data every year(only pc-miner)

The blockheader has two segments with a total length of 64 bit0 (of which blocktime is 64 bits), which strongly prevents the collapse effect of the sha256 operation in the ASIC miner, so that the mining difficulty will not increase indefinitely. The centralization for the high hashrate of the mining pool is strongly restricted. Census and prune the transactions (at most 4 outputs per transaction) whose all outputs are spent,in the block below 1300 depth in batches(i.e. clear up the input and output at the same time, and only keep the version of all-outs-spent transaction on the disk,--not serialize vin and vout). 250 for each batch, 20 block files(one file per block) will be reconstructed for each block received from other nodes, that is to say, 5000 transactions will be pruned at a time. And special mechanism is used to make the synchronization of data from malicious nodes error free. Only 1G data is increased every year. The data it running for 1000 years will be no more than 1T. Block size is 2M, and only 1g data is increased every year without SPV, which strongly prevents the storage of a large number of block data reducing the number of nodes. At the same time, 'four outputs per tx' limit the settlement of the mining pool, and strongly prevent the centralization of the mining pool. For example, the settlement is sent to 4000 miners, which requires 1000 transactions. All currencies are locked in the maturity of 300 blocks (the input can only be used as prevout after 300 blocks), which strongly prevents the frequency of trading speculation, the crash from the online exchange, and prevent the centralization of the biggest online exchange in the world.
This has achieved "absolute decentralization".
At present, the tip height is only 600, and there is no pre-mined. The RPC is stable and reliable same as bitcoin 0.10.2. No segwit but P2SH, a little change based on 0.10.2. Usage: $ /download-directory/bitcoind -addnode =47.114.58.108 (same for Ubuntu) with bitcoin.conf configuration file
Detailed introduction,original text is as follows: github-holyangel250-bitsupercoin
submitted by DangerousDetail8 to BitcoinMining [link] [comments]

Solve the "storage, mining pool and exchange centralization", and only generate 1G data every year

The blockheader has two segments with a total length of 64 bit0 (of which blocktime is 64 bits), which strongly prevents the collapse effect of the sha256 operation in the ASIC miner, so that the mining difficulty will not increase indefinitely. The centralization for the high hashrate of the mining pool is strongly restricted. Census and prune the transactions (at most 4 outputs per transaction) whose all outputs are spent,in the block below 1300 depth in batches(i.e. clear up the input and output at the same time, and only keep the version of all-outs-spent transaction on the disk,--not serialize vin and vout). 250 for each batch, 20 block files(one file per block) will be reconstructed for each block received from other nodes, that is to say, 5000 transactions will be pruned at a time. And special mechanism is used to make the synchronization of data from malicious nodes error free. Only 1G data is increased every year. The data it running for 1000 years will be no more than 1T. Block size is 2M, and only 1g data is increased every year without SPV, which strongly prevents the storage of a large number of block data reducing the number of nodes. At the same time, 'four outputs per tx' limit the settlement of the mining pool, and strongly prevent the centralization of the mining pool. For example, the settlement is sent to 4000 miners, which requires 1000 transactions. All currencies are locked in the maturity of 300 blocks (the input can only be used as prevout after 300 blocks), which strongly prevents the frequency of trading speculation, the crash from the online exchange, and prevent the centralization of the biggest online exchange in the world.
This has achieved "absolute decentralization".
At present, the tip height is only 600, and there is no pre-mined. The RPC is stable and reliable same as bitcoin 0.10.2. No segwit but P2SH, a little change based on 0.10.2. Usage: $ /download-directory/bitcoind -addnode =47.114.58.108 (same for Ubuntu) with bitcoin.conf configuration file
Detailed introduction,original text is as follows: github-holyangel250-bitsupercoin
submitted by DangerousDetail8 to BitcoinSerious [link] [comments]

Solve the "storage, mining pool and exchange centralization", and only generate 1G data every year

The blockheader has two segments with a total length of 64 bit0 (of which blocktime is 64 bits), which strongly prevents the collapse effect of the sha256 operation in the ASIC miner, so that the mining difficulty will not increase indefinitely. The centralization for the high hashrate of the mining pool is strongly restricted. Census and prune the transactions (at most 4 outputs per transaction) whose all outputs are spent,in the block below 1300 depth in batches(i.e. clear up the input and output at the same time, and only keep the version of all-outs-spent transaction on the disk,--not serialize vin and vout). 250 for each batch, 20 block files(one file per block) will be reconstructed for each block received from other nodes, that is to say, 5000 transactions will be pruned at a time. And special mechanism is used to make the synchronization of data from malicious nodes error free. Only 1G data is increased every year. The data it running for 1000 years will be no more than 1T. Block size is 2M, and only 1g data is increased every year without SPV, which strongly prevents the storage of a large number of block data reducing the number of nodes. At the same time, 'four outputs per tx' limit the settlement of the mining pool, and strongly prevent the centralization of the mining pool. For example, the settlement is sent to 4000 miners, which requires 1000 transactions. All currencies are locked in the maturity of 300 blocks (the input can only be used as prevout after 300 blocks), which strongly prevents the frequency of trading speculation, the crash from the online exchange, and prevent the centralization of the biggest online exchange in the world.
This has achieved "absolute decentralization".
At present, the tip height is only 600, and there is no pre-mined. The RPC is stable and reliable same as bitcoin 0.10.2. No segwit but P2SH, a little change based on 0.10.2. Usage: $ /download-directory/bitcoind -addnode =47.114.58.108 (same for Ubuntu) with bitcoin.conf configuration file
Detailed introduction,original text is as follows: github-holyangel250-bitsupercoin
submitted by DangerousDetail8 to altcoin_news [link] [comments]

Groestlcoin 6th Anniversary Release

Introduction

Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

Windows
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
OSX
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.
Ubuntu
http://groestlcoin.org/forum/index.php?topic=441.0

Other Linux

http://groestlcoin.org/forum/index.php?topic=97.0

Download

Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here

Source

ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.

Features

Download

iOS
Android

Source

ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.

Features

Download

Main Release (Main Net)
Testnet Release

Source

ALL NEW! – GroestlcoinSeed Savior

Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases.
This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats.
To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.

Features

Live Version (Not Recommended)

https://www.groestlcoin.org/recovery/

Download

https://github.com/Groestlcoin/mnemonic-recovery/archive/master.zip

Source

ALL NEW! – Vanity Search Vanity Address Generator

NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator.
VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address.
VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase.
VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).

Features

Usage

https://github.com/Groestlcoin/VanitySearch#usage

Download

Source

ALL NEW! – Groestlcoin EasyVanity 2020

Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet.
If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).

Features

Download

Source

Remastered! – Groestlcoin WPF Desktop Wallet (v2.19.0.18)

Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode.
This wallet was previously deprecated but has been brought back to life with modern standards.

Features

Remastered Improvements

Download

Source

ALL NEW! – BIP39 Key Tool

Groestlcoin BIP39 Key Tool is a GUI interface for generating Groestlcoin public and private keys. It is a standalone tool which can be used offline.

Features

Download

Windows
Linux :
 pip3 install -r requirements.txt python3 bip39\_gui.py 

Source

ALL NEW! – Electrum Personal Server

Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node.
It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node.
Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine.
Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in.
Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet.
Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.

Features

Download

Windows
Linux / OSX (Instructions)

Source

UPDATED – Android Wallet 7.38.1 - Main Net + Test Net

The app allows you to send and receive Groestlcoin on your device using QR codes and URI links.
When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.

Changes

Download

Main Net
Main Net (FDroid)
Test Net

Source

UPDATED – Groestlcoin Sentinel 3.5.06 (Android)

Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets).
Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet.
Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.

Changes

Download

Source

UPDATED – P2Pool Test Net

Changes

Download

Pre-Hosted Testnet P2Pool is available via http://testp2pool.groestlcoin.org:21330/static/

Source

submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

Nano mainnet stress test goal - 100mio txn in 1 day.

Seeing a coin do a stress test today, struggling to cross 1.3 million right now.
Nano did 250k transactions in barely 30 mins of spam (the 1111lambo tests). All that is needed for more transactions is generating more PoW. We can crowd fund such an initiative.
Setting a high standard will serve as a benchmark for the whole industry.
Even 10 million txn in a day will be about 5 times times faster then the best p2p coin out there.
submitted by LtSurgeRaichu to nanocurrency [link] [comments]

No inbound connections on my bitcoin full node with TOR

update: it's ok now, it only required some time. Also, looking at debug.log it won't show anything about inbound connections as I thought, it must be used `bitcoin-cli getpeerinfo` in order to get all the connections info (inbound + outbound)
Can someone connect to my node? u3ob433qu3ebkmsu.onion:8333
I'm behind a CG-NAT so I thought to use TOR to overcame it but still I have outbound connections but no inbound.
$ bitcoin-cli getnetworkinfo
{ "version": 180000, "subversion": "/Satoshi:0.18.0/", "protocolversion": 70015, "localservices": "000000000000040c", "localrelay": true, "timeoffset": 0, "networkactive": true, "connections": 10, "networks": [ { "name": "ipv4", "limited": true, "reachable": false, "proxy": "127.0.0.1:9050", "proxy_randomize_credentials": true }, { "name": "ipv6", "limited": true, "reachable": false, "proxy": "127.0.0.1:9050", "proxy_randomize_credentials": true }, { "name": "onion", "limited": false, "reachable": true, "proxy": "127.0.0.1:9050", "proxy_randomize_credentials": true } ], "relayfee": 0.00001000, "incrementalfee": 0.00001000, "localaddresses": [ { "address": "u3ob433qu3ebkmsu.onion", "port": 8333, "score": 4 } ], "warnings": "" } 
bitcoin.conf
server=1 daemon=1 # RPC rpcuser=***** rpcpassword=******* # TOR onlynet=onion proxy=127.0.0.1:9050 bind=127.0.0.1 dnsseed=0 dns=0 addnode=nkf5e6b7pl4jfd4a.onion addnode=yu7sezmixhmyljn4.onion # Raspberry Pi optimizations dbcache=100 maxorphantx=10 maxmempool=50 maxconnections=40 maxuploadtarget=5000 prune=6000 
submitted by LiL0u to Bitcoin [link] [comments]

Brief introduction to Joinmarket (coinjoin implementation), incl setup guides for RaspiBolt and RaspiBlitz nodes

To understand the purpose and functionality of Joinmarket, you should first understand the basics of the CoinJoin mechanism. Some basic level introduction to CoinJoin can be found here:
https://bitcoinmagazine.com/articles/coinjoin-combining-bitcoin-transactions-to-obfuscate-trails-and-increase-privacy-1465235087 (includes a brief description of Joinmarket as well)
https://en.bitcoin.it/wiki/CoinJoin
What is Joinmarket?
Joinmarket is essentially a wallet with a very specific purpose: it enables users to do automated coinjoins (mixing of UTXOs) with each other. The user can assume the role of a Maker, offering their coins as being available for coinjoins, thus providing liquidity and earning small fees if their coins are being chosen for a mixing round. Or the user can assume the role of a Taker, choosing from the pool of available coins to initiate a mixing round.
Of course, the roles are not permanently fixed and the user can switch between them at any time desired. The coins never leave the user’s wallet and can be transferred out at any given point in time, so the wallet is non-custodial and trustless. Joinmarket requires the user to use their own node for that purpose.
So besides the basic wallet functionality, Joinmarket serves as a platform to match coinjoin Makers and Takers. Both profit in increased privacy for their coins, and Makers additionally profit from the small fees the Takers pay. The matching and mixing processes happen automatically, users only need to adjust some few settings (or simply use the default ones), fund their wallet and run the software.
For the role of a Maker the user runs the “Yield Generator” (automated script creating an offer), and for the role of a Taker there are two options of either sending a single coinjoined payment or to run the “Tumbler” for multiple coinjoins. Again, all these are automated functions, only requiring the funding of the wallet and starting the software with some few parameters.
Although Joinmarket has been available for almost four years and has a dedicated user base (and a stable liquidity pool), there is quite a hurdle for the set up as it requires working with command line interface. But it can be done by simply copypasting commands from the various guides. There is also a basic GUI (graphic user interface) available after the set up process.
More information:
Bitcoin Wiki (high level overview): https://en.bitcoin.it/wiki/JoinMarket
GitHub (source code, installation, technical infos): https://github.com/JoinMarket-Org/joinmarket
Video presentation by u/belcher_ (one of the creators): https://www.youtube.com/watch?v=hJZnkm0jW5E
Video demo by u/waxwing (one of the creators): https://www.youtube.com/watch?v=hwmvZVQ4C4M
Joinmarket subreddit: https://reddit.com/joinmarket/
Joinmarket set up guide for RaspiBolt: https://github.com/kristapsk/raspibolt-extras/blob/mastejoinmarket.md
RaspiBlitz: https://github.com/openoms/bitcoin-tutorials/blob/mastejoinmarket/README.md
[Note: if you only want to use Joinmarket as a Taker (using the Tumbler or the Sendpayment options) you don’t necessarily need the guides for RaspiBolt/RaspiBlitz. You can simply install Joinmarket on your desktop and let it connect to your node (you only need to adjust the joinmarket.cfg file, and possibly your bitcoin.conf file on your node, so Joinmarket can connect to it). You will need a running node in any case though (it can be a pruned node).
The reason why you would want to install Joinmarket on a Raspibolt/Raspiblitz itself is that when using the Maker feature (Yield Generator), it should be running continuously so Takers can take up your offer at any time they wish.]
submitted by TheGreatMuffin to Bitcoin [link] [comments]

Brief introduction to Joinmarket (coinjoin implementation), incl setup guides for RaspiBolt and RaspiBlitz nodes

To understand the purpose and functionality of Joinmarket, you should first understand the basics of the CoinJoin mechanism. Some basic level introduction to CoinJoin can be found here:
https://bitcoinmagazine.com/articles/coinjoin-combining-bitcoin-transactions-to-obfuscate-trails-and-increase-privacy-1465235087 (includes a brief description of Joinmarket as well)
https://en.bitcoin.it/wiki/CoinJoin
What is Joinmarket?
Joinmarket is essentially a wallet with a very specific purpose: it enables users to do automated coinjoins (mixing of UTXOs) with each other. The user can assume the role of a Maker, offering their coins as being available for coinjoins, thus providing liquidity and earning small fees if their coins are being chosen for a mixing round. Or the user can assume the role of a Taker, choosing from the pool of available coins to initiate a mixing round.
Of course, the roles are not permanently fixed and the user can switch between them at any time desired. The coins never leave the user’s wallet and can be transferred out at any given point in time, so the wallet is non-custodial and trustless. Joinmarket requires the user to use their own node for that purpose.
So besides the basic wallet functionality, Joinmarket serves as a platform to match coinjoin Makers and Takers. Both profit in increased privacy for their coins, and Makers additionally profit from the small fees the Takers pay. The matching and mixing processes happen automatically, users only need to adjust some few settings (or simply use the default ones), fund their wallet and run the software.
For the role of a Maker the user runs the “Yield Generator” (automated script creating an offer), and for the role of a Taker there are two options of either sending a single coinjoined payment or to run the “Tumbler” for multiple coinjoins. Again, all these are automated functions, only requiring the funding of the wallet and starting the software with some few parameters.
Although Joinmarket has been available for almost four years and has a dedicated user base (and a stable liquidity pool), there is quite a hurdle for the set up as it requires working with command line interface. But it can be done by simply copypasting commands from the various guides. There is also a basic GUI (graphic user interface) available after the set up process.
More information:
Bitcoin Wiki (high level overview): https://en.bitcoin.it/wiki/JoinMarket
GitHub (source code, installation, technical infos): https://github.com/JoinMarket-Org/joinmarket
Video presentation by u/belcher_ (one of the creators): https://www.youtube.com/watch?v=hJZnkm0jW5E
Video demo by u/waxwing (one of the creators): https://www.youtube.com/watch?v=hwmvZVQ4C4M
Joinmarket subreddit: https://reddit.com/joinmarket/
Joinmarket set up guide for RaspiBolt: https://github.com/kristapsk/raspibolt-extras/blob/mastejoinmarket.md
RaspiBlitz: https://github.com/openoms/bitcoin-tutorials/blob/mastejoinmarket/README.md
[Note: if you only want to use Joinmarket as a Taker (using the Tumbler or the Sendpayment options) you don’t necessarily need the guides for RaspiBolt/RaspiBlitz. You can simply install Joinmarket on your desktop and let it connect to your node (you only need to adjust the joinmarket.cfg file, and possibly your bitcoin.conf file on your node, so Joinmarket can connect to it). You will need a running node in any case though (it can be a pruned node).
The reason why you would want to install Joinmarket on a Raspibolt/Raspiblitz itself is that when using the Maker feature (Yield Generator), it should be running continuously so Takers can take up your offer at any time they wish.]
submitted by TheGreatMuffin to joinmarket [link] [comments]

Here is where Nano is going (and where it's been)

It seems like a lot of people have forgotten what Nano has accomplished over the past year, or they aren't sure where it's going. Hopefully this list helps.
What's been done in the past year:
Coming soon:
Still in the pipeline:
Remember that it takes time to build a full ecosystem. Bitcoin was around for years before it got real fiat support and general awareness. Nano is doing the right things.
submitted by Qwahzi to nanocurrency [link] [comments]

[Full node] How long does it take to sync.

Thought it would be fun this weekend to burn some credits at my VPS provider and fire up some full nodes. Can anyone who has done a full sync this month give me some idea of how long it took?
These are the projections, but every day they seem to add another day to the projection.
  1. 2xCore 13GB Mem prune=550: Projected 7 hrs
  2. 1xCore 1.7GB Mem no-prune: Projected 8.9 days
  3. 1xCore 1.7GB Mem prune=550: Projected 7.0 days
  4. 1 vCore 0.6GB Mem prune=20480: Projected 20 days
BTW, all are running Ubuntu 17.10 with bitcoind v0.15.1. [1] is running with.bitcoin dir out of shm. Hence the insane 7hr sync. Just wanted to make sure network was not the bottleneck.
Can anyone share their experience?
BTW the datacenter hosting my VPS has very good network bandwidth.
Update:
  1. Now projected at 1.8 days
  2. Now projected at 6.7 days
  3. Now projected at 7.4 days
  4. Now projected at 23 days
submitted by brianddk to BitcoinDiscussion [link] [comments]

Lightning node on Windows - testing, get not connected

Ok after testing BTCPay, C-Lightning, LND on Ubuntu I said ok let's try also the Windows implementation, is just few clicks and done (as it is promoted).
So I followed this github guide that actually send you to this one.
OK, started Bitcoin-core client on Windows 7 x64, with an already synced data folder. Empty bitcoin.conf (none of guides says how to configure the conf file). Wait until the client is full synced. And then launched the windows-node-launcher (from a subfolder inside Bitcoin folder). All good, started slowly and a small popup appeared in systray saying Bitcoin node is syncing. Reviewed the config of Bitcoin and LND through that little app in systray and saw that bitcoin.conf was already filled with some settings. Didn't change anything. After 1 day (with the bitcoin blockchain already synced), the systray popup still says that is syncing and have a red dot. In the tutorial says that we have to leave it to sync until is blue and then green.
I said, ok maybe it has more things to do. So I open that LND Output link, to see what is going on... And I see that LND is not well. Says: 2019-04-06 21:11:29.772 [INF] LTND: Version: 0.6.0-beta commit=v0.6-beta-rc3, build=production, logging=default 2019-04-06 21:11:29.772 [INF] LTND: Active chain: Bitcoin (network=mainnet) 2019-04-06 21:11:29.774 [INF] CHDB: Checking for schema update: latest_version=8, db_version=8 2019-04-06 21:11:29.808 [INF] RPCS: password RPC server listening on 127.0.0.1:10009 2019-04-06 21:11:29.808 [INF] RPCS: password gRPC proxy started at 127.0.0.1:8080 2019-04-06 21:11:29.808 [INF] LTND: Waiting for wallet encryption password. Use lncli create to create a wallet, lncli unlock to unlock an existing wallet, or lncli changepassword to change the password of an existing wallet and unlock it. 2019-04-06 21:11:32.673 [INF] LNWL: Opened wallet 2019-04-06 21:11:33.183 [INF] LTND: Primary chain is set to: bitcoin unable to create chain control: unable to connect to bitcoind: unable to subscribe for zmq block events: dial tcp 127.0.0.1:18502: connectex: No connection could be made because the target machine actively refused it. 2019-04-06 21:11:36.087 [INF] LTND: Shutdown complete unable to connect to bitcoind: unable to subscribe for zmq block events: dial tcp 127.0.0.1:18502: connectex: No connection could be made because the target machine actively refused it. 2019-04-06 21:11:39.229 [INF] LTND: Version: 0.6.0-beta commit=v0.6-beta-rc3, build=production, logging=default
Now the bitcoin.conf have this: printtoconsole=1 rpcallowip=::/0 whitelist=0.0.0.0/0 datadir=C:\Users\Admin\AppData\Roaming\Bitcoin prune=0 txindex=1 server=1 disablewallet=0 timeout=6000 rpcuser=user rpcpassword=defaultxzxxxxx zmqpubrawblock=tcp://127.0.0.1:18502 zmqpubrawtx=tcp://127.0.0.1:18503 dbcache=2408
And LND.conf have this: (#) Auto-Generated Configuration File (#) Node Launcher version 6.0.2 debuglevel=info restlisten=127.0.0.1:8080 rpclisten=127.0.0.1:10009 tlsextraip=127.0.0.1 listen=127.0.0.1:9735 alias=aliasme color=#00aa7f bitcoin.active=1 bitcoin.node=bitcoind bitcoind.rpchost=127.0.0.1:8332 bitcoind.rpcuser=user bitcoind.rpcpass=defaultxxxxx bitcoind.zmqpubrawblock=tcp://127.0.0.1:18502 bitcoind.zmqpubrawtx=tcp://127.0.0.1:18503
So what is going on here? I will have to wait indefinitely? Somebody can give some help or explanation? Is this LND node working on Windows Server 2008 or 2012?
submitted by Mr--Robot to Bitcoin [link] [comments]

Soo after almost 3 months of setting up I have my own LN full node running on RP3

Soo after almost 3 months of setting up I have my own LN full node running on RP3
I have been eager to try LN mainnet since the very beginning of it. I've found out about lnd, eclair, zap and other wallets but every scenario I tried to use it failed because of critical issues:
  • eclair does not really constitute a wallet, it's more like a credit card - you can send money but not receive it
  • lnd is okay, but requires a server and tons of resources for maintaining a full node, can't be used securely, efficiently and mobily at the same time
  • zap offers some cloud wallet (in testnet!) by default, this is a serious misunderstanding of my cryptoanarchy needs
  • web wallets - ah, forget it
So I've decided to use my Raspberry Pi with a very old laptop HDD attached (200GB so the pruning function has to be used) to create a backend wallet service and zap desktop (temporarily!) as my frontend control panel.
https://preview.redd.it/0vcq147887q11.png?width=1024&format=png&auto=webp&s=7bb6eccdd4110a857e5af0400acc2d7e1ee7ee85
Setting up Pi is easy, lots of tutorials over the internet, not gonna discuss it here. Then I had to obtain bitcoind (current rel: bitcoin-0.17.0-arm-linux-gnueabihf.tar.gz) and lnd (lnd-linux-armv7-v0.5-beta.tar.gz), create a bitcoin technical user, deploy the tools, configure and install new systemd services and go through the configs. This is a tricky part, so let's share:
# Generated by https://jlopp.github.io/bitcoin-core-config-generato # This config should be placed in following path: # ~/.bitcoin/bitcoin.conf # [core] # Set database cache size in megabytes; machines sync faster with a larger cache. Recommend setting as high as possible based upon machine's available RAM. dbcache=100 # Keep at most  unconnectable transactions in memory. maxorphantx=10 # Keep the transaction memory pool below  megabytes. maxmempool=50 # Reduce storage requirements by only storing most recent N MiB of block. This mode is incompatible with -txindex and -rescan. WARNING: Reverting this setting requires re-downloading the entire blockchain. (default: 0 = disable pruning blocks, 1 = allow manual pruning via RPC, greater than 550 = automatically prune blocks to stay under target size in MiB). prune=153600 # [network] # Maintain at most N connections to peers. maxconnections=40 # Use UPnP to map the listening port. upnp=1 # Tries to keep outbound traffic under the given target (in MiB per 24h), 0 = no limit. maxuploadtarget=5000 # [debug] # Log IP Addresses in debug output. logips=1 # [rpc] # Accept public REST requests. rest=1 # [wallet] # Do not load the wallet and disable wallet RPC calls. disablewallet=1 # [zeromq] # Enable publishing of raw block hex to 
. zmqpubrawblock=tcp://127.0.0.1:28332 # Enable publishing of raw transaction hex to
. zmqpubrawtx=tcp://127.0.0.1:28333 # [rpc] # Accept command line and JSON-RPC commands. server=1 # Username and hashed password for JSON-RPC connections. The field comes in the format: :$. RPC clients connect using rpcuser=/rpcpassword= arguments. You can generate this value with the ./share/rpcauth/rpcauth.py script in the Bitcoin Core repository. This option can be specified multiple times. rpcauth=xxx:yyy$zzz
Whooaa, this online config generator is really helpful, but I still had to manually correct a few things. The last line is obviously generated by rpcauth.py, I disabled the wallet functionality as lnd is going to take care of my funds. ZMQ is not available to the network so only my LND can use it, RPC usage I still have to think through a little, in general I would like to have my own block explorer some day but also be safe from any hacking attempts (thus I would need at least 2 RPC ports/user accounts - one for lnd, one for block explorer frontend). No ports open on firewall at this time, only UPnP is active and gently opens 8333 for block/tx transfers.
Now, synchronizing the blockchain took me time from mid-July to early September... The hard drive is really slow, also my external HDD drive has some trouble with its A/C adapter so Pi was getting undervoltage alerts all the time. Luckily, it is just downclocking when it happens and slowly but steadily synchronized the whole history. After all, I'm not paying even $5 monthly for a VPS, it is by design the cheapest hardware I could use to set up my LN wallet.
When bitcoind was ready (I've heard some stories about btcd but I don't trust this software yet, sorry), it's time to configure lnd.conf:
[Application Options] debuglevel=trace rpclisten=0.0.0.0:10009 externalip=X.X.X.X:9735 listen=0.0.0.0:9735 alias=X color=#XXXXXX [Bitcoin] bitcoin.active=1 bitcoin.mainnet=1 bitcoin.node=bitcoind [Bitcoind] bitcoind.rpchost=127.0.0.1 bitcoind.rpcuser=X bitcoind.rpcpass=X bitcoind.zmqpubrawblock=tcp://127.0.0.1:28332 bitcoind.zmqpubrawtx=tcp://127.0.0.1:28333 
Here I've had to XXX a little more fields, as not only the bitcoind RPC credentials are stored here, but also my node's public information (it should be illegal to run nodes without specifically selected color and alias!). It is public (and I had to open port 9735 on my firewall), but not necessarily connected to my reddit account for most of the adversaries, so let's keep it this way. In fact, I also see a security vulnerability here: my whole node's stability depends on the IP being static. I could swap it for a .tk domain but who can tell if the bad guys won't actively fight DNS system in order to prevent global economic revolution? As such, I would rather see node identification in LN based on a public key only with possible *hints* of last-known-ip-address but the whole discovery should be performed by the nodes themself in a p2p manner, obviously preventing malicious actors from poisoning the network in some way. For now, I consider the IP stability a weak link and will probably have to pay extra Bitcoin TX fees when something happens to it (not much of a cost luckily!).

https://preview.redd.it/hjd1nooo77q11.png?width=741&format=png&auto=webp&s=14214fc36e3edf139faade930f4069fc31a3e883
Okay then, lnd is up and running, had to create a wallet and give it a night for getting up to speed. I don't know really what took it so long, I'm not using Windows nor 'localhost' in the config so the issues like #1027 are not the case. But there are others like #1545 still open so I'm not going to ponder much on this. I haven't really got any idea how to automatically unlock the wallet after Pi restart (could happen any time!), especially since I only tried to unlock it locally with lncli (why would I enter the password anywhere outside that host?), but let's say that my wallet will only be as stable as my cheap hardware. That's okay for the beta phase.
Finally, zap-desktop required me to copy tls.cert and admin.macaroon files to my desktop. If my understanding of macaroon (it's like an authentication cookie, that can later be revoked) is correct then it's not an issue, however it would be nice to have a "$50 daily limit" macaroon file in the future too, just to avoid any big issues when my client machine gets stolen. Thanks to this, I can ignore the silly cloud-based modes and have fully-secure environment of my home network being the only link from me to my money.
https://preview.redd.it/11bw3dgw47q11.png?width=836&format=png&auto=webp&s=b7fa7c88d14f22441cbbfc0db036cddfd7ea8424
Aaand there it is. The IP took some time to advertise, I use 1ml.com to see if my node is there. The zap interface (ZapDesktop-linux-amd64-v0.2.2-beta.deb) lacks lots of useful information so I keep learning lncli syntax to get more data about my new peers or the routes offered. The transactions indeed run fast and are ridiculously cheap. I would really love to run Eclair with the same settings but it doesn't seem to support custom lnd (why?). In fact, since all I need is really a lncli wrapper, maybe it will be easy to write my own (seen some web gui which weighs 700MB after downloading all dependencies with npm - SICK!). Zap for iOS alpha test registration is DOWN so I couldn't try it (and I'm not sure if it allows custom lnd selection), Zap for Android doesn't even exist yet... I made a few demo transactions and now I will explore all those fancy t-shirt stores as long as the prices are still in "early investor" mode - I remember times when one could get 0.001 BTC from a faucet...
https://preview.redd.it/42sdyoce57q11.png?width=836&format=png&auto=webp&s=7ec8917eaf8f3329d51ce3e30e455254027de0ee
If you find any of the facts presented by me false, I am happy to find out more in the discussion. However what I did I did mostly for fun, without paying much attention to the source code, documentation and endless issue lists on github. By no means I claim this tutorial will work for you but I do think I shared the key points and effort estimations to help others decide if they want a full-node LN client too. I'm also interested in some ideas on what to do with it next (rather unlikely that I will share my lnd admin.macaroon with anyone!) especially if it gives me free money. For example, I can open 1000 channels and start earning money from fees, although I no longer have more Bitcoins than the LN capacity yields... I will probably keep updating the software on my Pi until it leaves beta phases and only then will pour more money inside. I'm also keen on improving the general security of my rig and those comments I will answer more seriously.
submitted by pabou to Bitcoin [link] [comments]

Groestlcoin June Development Update & Release!

Another Quarter, Another Release! The Groestlcoin production factory has been working overtime as always in order to deliver even more tech to push Groestlcoin mainstream when the time comes.
There have been many new fantastic wallets and exchanges added to Groestlcoins repertoire over the past 3 months so we will re-cap these before moving on to what is new today.

Recap

What's New

Re-forged: Groestlcoin Samourai

Groestlcoin Samourai is a wallet for the streets. A modern Groestlcoin wallet hand-forged to keep your transactions private, your identity masked, and your funds secure. Its main advantages are its extreme portability and is the most secure Groestlcoin mobile HD wallet.
We've built a wallet that Groestlcoin deserves. If you are looking for a wallet that Silicon Valley will never build, the regulators will never allow, and the VC's will never invest in, this is the perfect wallet for you.
![Groestlcoin Samourai Release Video](http://img.youtube.com/vi/i3WU8Tde8XQ/0.jpg)

Head over to the Groestlcoin Samourai Release Page here for the full release announcement.

New: GroestlImage

Groestlimage turns any file into a mnemonic phrase allowing users to generate Groestlcoin private keys and addresses based on the data URI of the provided file. A picture is worth a thousand Groestls.

Features:

Link

https://groestlcoin.org/groestlimage/

Source Code

https://github.com/Groestlcoin/groestlimage

New: Groestlcoin Core Config Generator

Groestlcoin Core Config Generator is a simple GUI to configure the groestlcoin.conf file – A developers dream tool!
Each configuration option is available via the user interface, grouped by what attributes they affect. For ease of getting started with a new configuration, a variety of preset "node classes" are available on the right-hand-side of the screen. Selecting a preset will load our recommended base configuration for a node fitting that description, at which point you can then tune the configuration at the single option level.

Features

Link

https://config.groestlcoin.org/

Source Code

https://github.com/Groestlcoin/groestlcoin-core-config-generator

New: Groestlcoin Dumb Block Explorer

Dumb Block Explorer is a trivial block explorer written in a single PHP file. Now everybody can run their own block explorer.

Features

Link

https://www.groestlcoin.org/explore

Source Code

https://github.com/Groestlcoin/dumb-block-explorer

New: Groestlcoin SMS Push TX

Groestlcoin Simple Push TX is a server to push Groestlcoin transactions via SMS. Now everybody can send new transactions via SMS if the Internet is not usable (i.e. blocked by government entities or becomes otherwise unavailable).

Features

Source Code

https://github.com/Groestlcoin/smspushtx

Update: Electrum-GRS 3.3.6

Electrum-GRS is Groestlcoins #1 thin-client for Windows, MacOS, Linux and Android, based on a client-server protocol. Supporting multi-sig wallets without the bloat of downloading the entire blockchain.

New Features (Universal)

New Features (Windows, MacOS, Linux)

New Features (Android)

Link

https://github.com/Groestlcoin/electrum-grs/releases/download
https://play.google.com/store/apps/details?id=org.groestlcoin.electrumgrs

Source Code

https://github.com/Groestlcoin/electrum-grs
submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

ABCore - Android Bitcoin Core

ABCore - Android Bitcoin Core submitted by a56fg4bjgm345 to Bitcoin [link] [comments]

Is it possible to "fool" Bitcoin Core into thinking that a network mounted drive is actually local?

I don't have room on my computer to download the blockchain, but have plenty of space on my NAS, but Bitcoin complains that it can't get a lock on the file(s). Any advice appreciated...
submitted by dbbeginner to Bitcoin [link] [comments]

Run a 0.14 Full-Node on RaspberryPi3 Pruned(less than 16GB SD needed)

Hi!
Happy if this guide helps you.
Tip if you want: 19656Uwdwko5RjtnuwQENpjBwE3ChzD59v
UPDATE 04/06/17
Add 'uacomment=UASF-SegWit-BIP148' into your bitcoin.conf if you want to signal UASF.
UPDATE 03/13/17
ADDED a tl;dr; Version at the end of this Post.
UPDATE 03/12/17:
Just to test it - I reinstalled all on 8GB SD and it works as well. But maybe you should use at least 16GB for the beginning.
Using a 128GB card for the first version was a little bit stupid - so I reinstalled everything on a 8GB SD card. Including Linux and a pruned blockchain - and it works.
I used prune=550 and Jessie Lite (headless / command line) - without wallet and gui.
The SD is almost full, but it works so far
I also updated the whole manual a bit to make things more clear. Thank you for all your feedback!
Just started my Bitcoin Node today and wanted to share the way I did it with people who are interested in running their own full node. It took some time to write everything down - hopefully correct so far.
I am sure, many people around bitcoin are way more informed and educated as I am - I am the noob. So I wrote this manual to help users like me - noobs, to get started with a cheap, simple bitcoin node on raspberry pi.
Have fun!
I wanted to get my Raspberry Pi 3 working as a node to support the network. Actually the process of installing and running the node was more or less easy - but for Noobs (like I am) it might be a bit tricky to start the whole thing, because there are different ways.
Did you - like me - think you would need +120GB on the raspi, external USB HDD to be a full node? You won't!
If you have a Raspberry and you know what Bitcoin is, I guess, you are a little bit aware of linux, networks and of course bitcoin - so I won't go into detail too much.
This guide is just a little helper to get a full node running on your raspberry pi. Thanks to the help of the nice people in this sub and of course the documentation by the developers, I got it working - and of course also special thanks to raspnode.com - as I followed their tutorial to start - I went some other ways here and there - so please read carefully.
For the Part 2 I would suggest to have http://raspnode.com/diyBitcoin.html open and read through my manual.
I split the tutorial in 2 Parts - PART ONE is about installing the client on your PC and downloading the Blockchain.
PART TWO is about the setup of the raspberryPi and transferring the pruned blockchain to the pi and run it as a full node!
The first thing to be aware of is: You actually need to download the whole blockchain to get this working - if you already have your bitcoin client synced on the PC / MAC great you can reuse it!
Now you might think "but you said less than 16GB in the title!"
Yes, but the good thing is you won't need to download it on your Raspberry, neither you need to sync it completely on your raspberry which took ages (weeks!) before. When you finished this Guide, you will just have a max. 4GB Blockchain on your Raspberry Pi - but it still is a full node! The magic word is Pruning.
Maybe even a 8GB SD Card works just fine including Linux (jessie lite)!
So, if you already have a full node on your PC - Great you can almost skip PART ONE - BUT have at how to Prune in PART ONE if you don't know about it.
For PART TWO you'll need a Raspberry Pi 2 or 3 (I used 3) min. 8GB (works also) or better 16GB SD Card. (I used a 128GB for the first version of this manual - which is way too big)

PART ONE

This is the manual how to get started on you PC / MAC / Linux (I did it on Win7)
Go to: https://bitcoin.org/en/download and download the core Client for your Machine (I used win64).
Install it and configure it to save the Blockchaindata to the directory of your choice - so instead getting 120GB on your C drive, I would suggest to download it to another place like a USB drive.
You can set this up during the install. Standard folder for the blockchain folder is "%APPDATA%\Bitcoin" on Windows.
or you can do it after the install by creating a bitcoin.conf file inside your installation folder / or %APPDATA%\Bitcoin and add
datadir=l:\yourfolder
to the file. Line by line.
By the way here you could also just add dbcache - to use more memory to speed up the process a bit:
dbcache=4096
if you don't want to use the settings inside the program. (you can also set this inside the program under settings! If you have this inside the bitcoin.conf you will see the amount you set there from inside the program - it overrides the values)
You can check inside the windows client under settings, if you can see a manual dbcache is set by having a look at the left footer area. When your dbcache value shows up, everything is fine.
So the Blockchain download process will take time - maybe a few days! Depending on your machine, internet connection and HDD.
The Blockchain is huge as it contains every single transaction of the past until today. You won't need to keep your PC running all the time, you can turn it off and on and it will resync automatically when you start bitcoin-qt.exe!
Make sure to close the client always via "quit" - ctrl+q.
After you have your bitcoin core installed, the blockchain downloaded and synced - you are ready to PRUNE!
First - close the Client and let it close smoothly. After it is really closed you can follow these steps:
By pruning, your blockchain will dramatically shrink. From 120GB to just a few GB.
Be aware, that you will lose your Downloaded Blockchain as pruning will erase a big chunk of it! If you have enough space, you could of course keep the full blockchain saved somewhere on another HDD.
You can prune by editing your bitcoin.conf file by adding:
prune=550
I used prune=1024 - not sure where the differences are right now (min. prune=550). (for my 8GB version I used 550! I suggest to use this.)
Save the bitcoind.conf file and restart your windows client.
It will now clean up the Blockchain. So just the latest blocks are saved. The client should start without any problems. Maybe it takes some time to prune the blockchain data.
Check if everything works normally (the client opens as usual, you can see an empty wallet) than close the client.
Inside the Bitcoin Folder, you'll find two folders called:
blocks chainstate
those are the interesting folders containing the important data (now pruned) - and we will transfer those two to the raspberry later!
Now you are good to start the raspi transfer explained in the next part.

PART 2

Here is what I did:
1) I installed Raspian Pixel (https://www.raspberrypi.org/downloads/raspbian/) using a 128 GB SD - which is not needed because of "Pruning" - I think a 16GB card might work, too! (You can also install Raspian Jessie Lite - which saves you even more space, as it runs headless - only command line) (Updated: It is better to use Jessie Lite to save a lot of space - when you are fine with only command line)
2) I followed partly this tutorial to get everything running and setup:
http://raspnode.com/diyBitcoin.html
Please have a look at it - I have copied the Headlines in capitals to let you know what I did, and what I skipped.
On Tutorial Page: Start with RASPBIAN (OPTIONAL) CONFIG OPTIONS.
Set You RasPi up including "EDITING FILES" to save your Layout at the tutorial page and come back here.
I skipped the CONFIGURE USB AND SET AUTOMOUNT process, as we are going to use PRUNING to reduce the 120GB to a tiny filesize - so USB Devices are not needed here!
It was necessary to ENLARGE SWAP FILE to install bitcoin core - otherwise it didn't went through which ended in a frozen raspi.
So have a close look by following the raspnode tutorial at: ENLARGE SWAP FILE.
I have my raspi running via cable to router - but you can also WiFi setup everything described under NETWORKING ON THE RASPBERRY PI.
Now comes the interesting part: Follow the steps at DOWNLOADING BITCOIN CORE DEPENDENCIES - they work fine for 0.14.0 too. Git should be on Board already when you installed Pixel - otherwise you would need to install it.
sudo apt-get install git -y (only jessy lite)
I skipped the next command lines - as I don't use bitcoin-qt wallet. If you want to use it as wallet - do the step.
mkdir ~/bin cd ~bin
Now you are in the folder you want your bitcoin core data be downloaded to via git. I didn't Downloaded the Berkeley Database source code - so I also skipped the whole next command lines
[email protected]~/bin$ wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz [email protected]~/bin$ tar -xzvf db-4.8.30.NC.tar.gz [email protected]~/bin$ cd db-4.8.30.NC/build_unix/ [email protected]~/bin/db-4.8.30.NC/build_unix$ ../dist/configure --enable-cxx [email protected]~/bin/db-4.8.30.NC/build_unix$ make -j4
and went on with "INSTALLING BITCOIN"!
I followed the first part but instead downloading 0.13 I took of course the latest version:0.14
git clone -b 0.14 https://github.com/bitcoin/bitcoin.git cd bitcoin ./autogen.sh
this might take some time to start.
If you have trouble with hanging RESOLVING DELTAS - just restart the Raspberry Pi and remove the bitcoin folder inside /~bin using
rm -rf bitcoin
this command will delete the folder and you can reuse
git clone -b 0.14 https://github.com/bitcoin/bitcoin.git

For some reason RESOLVING DELTAS is a common problem with different downloads - so just retry it and at least after 3 times it should work!

as I didn't use the GUI/ Wallet, I ran
./configure --enable-upnp-default --disable-wallet
as I don't need the wallet functionality.
I didn't need to use "MAKE" which saves you maybe up to 2.5 hours.
instead you can just go ahead with:
sudo make install
(If I am wrong in doing so - please let me know)
The install takes some time - and just a heads up: when it gets stuck somewhere - just redo the installation process - it took three times to went through - stuck at some processing.
After the installation took place you can finally get your Raspberry Pi Node running in no time!
To test if the the installation went through - you can just start bitcoind using:
bitcoind &
than check if everything is working so far:
bitcoin-cli getinfo
after a few seconds you should see version: etc...
if not, something went wrong. Try to redo the steps in the raspnode tutorial.
(don't give up if it failed - retry! Ask your questions here)
IMPORTANT: you need to stop bitcoin on your raspberry now!
bitcoin-cli stop
If you don't need an external USB Drive - what I hope - as we are going to use pruning just go ahead and skip the USB part and create a file inside (or follow the raspnode tutorial on how to setup the USB drive):
cd .bitcoin
sudo nano bitcoin.conf
and enter the exact same pruning size you have used on your Desktop Machine to prune. I used 1024 but the minimum is 550. (used 550 for the 8GB SD card on PC and Raspberry)
prune=550
That's it for the raspi.
update: To signal UASF enter in a new line:
uacomment=UASF-SegWit-BIP148

TRANSFER

Now you have to transfer the two folders CHAINSTATE and BLOCKS from your PC bitcoind directory to your raspberry.
I am using a program called "WINSCP" - it is free and easy to use: https://winscp.net/eng/download.php
We need this to transfer the files to the Raspberry pi. Pretty sure you can also do it via SSH - but I am the noob. So let's keep it simple.
Open Winscp and put in the IP Address of your Raspberry Pi, User and Password (same as in SSH)
You should now see the directories on your Raspberry Pi. There is a folder called
.bitcoin
enter it and you will see the two folders
blocks & chainstate
you can delete them on the raspberry as they have some data from your previous test inside.
Make sure you can also see the bitcoin.conf file in that directory, which needs to contain the exact same prune line, like the one on your desktop machine. If not, make sure to edit it via SSH. The line "datadir=l:\yourfolder" is obviously not needed in the Raspberry bitcoin.conf file.
Now grab the two folders CHAINSTATE and BLOCKS from your PC and copy them to your .bitcoind folder.
I also copied banlist.dat, fee_estimation.dat, mempool.dat and peers.dat to the folder - not really knowing if needed! Not needed.
The whole copy process might take some minutes (against some weeks in the old way).
After copying is finished, you can now start bitcoind on the Raspberry.
bitcoind &
the & symbol let you still use the command line while the process is running btw.
The process - if succesfull - will take some time to finish.
bitcoin-cli getinfo
Will give you some informations what is going on right now. When you can see, that it is checking the blocks, this is good!
If you get an error - double check - if you have the correct prune size (same as on desktop machine) - in bitcoin.conf and that this file is inside .bitcoin on RaspberryPi. It took me some time, to find my mistakes.
Congrats! You are almost a part of the network!
To make your node now a fullnode, you will need to go to your router (often 192.168.1.1) and enable portforwarding for your raspberry pi - and open ports 8333 - that's it!
You can now go to: https://bitnodes.21.co/nodes/
scroll down to "JOIN THE NETWORK" and check check if your node IP is connected!
It will show up as soon as the blocks are checked and the raspi is running.
Well done!
Now you are running a full node, with a small Blockchain and got it working in Minutes, not weeks!
I really hope, my little tutorial worked for you and your are part of the Node network now.
If you have problems or I made a mistake in this helper tut, just let me know and I will try to make it better.
Have fun and NODL!
the noob
tl;dr; (if you are a real noob start with the non-tl;dr version!)
tl;dr; PART ONE
1) Download & install / setup bitcoincore @ https://bitcoin.org/de/download
2) change dbcache to something smaller than your memory and download the whole Blockchain (120GB).
3) create a file called bitcoin.conf put the line prune=550 (or higher) in to activate pruning on win inside %appData%/bitcoin
4) Open ports 8333 on your Router to make this a full node with a smaller Blockchain.
You are running a full node on your PC.
tl;dr; PART TWO
1) Install jessie lite and the needed dependencies on your SDCard - Raspberry
( >git clone -b 0.14 https://github.com/bitcoin/bitcoin.git )
  • see tutorial for more info.
2) create a file called bitcoin.conf inside .bitcoin and add the same prune=Number you had on your PC.
3) transfer the pruned folders BLOCKS and CHAINSTATE to the Raspberry Folder .bitcoin
4)Start "bitcoind &"
5) let everything sync
6) Make sure you have port 8333 opened on your router.
You are running a full node on your Raspberry with a super small Blockchain (I put all on a 8GB SDcard)
Tip if you want : 19656Uwdwko5RjtnuwQENpjBwE3ChzD59v
updated 03/12 - will update more, soon.
updated 03/12.2 - I updated the whole process a bit and also added some improvements.
updated 03/14/ Added a tl;dr version at the end.
submitted by I-am-the-noob to Bitcoin [link] [comments]

Bitcoin Core prune not working

Hello everyone,
I have been searching this problem on the internet for the last three hours and I wasn't able to find a solution for my problem.
For a project, I need a bitcoin core installed and sync with the blockchain. However, I do not want to store the entire chain (simply I don't have enough space on VPS) I tried to run the bitcoind with prune option but didn't work. I will list things that I have tried and didn't work, and downloaded 60GB of chain, and caused my vps to freeze & reset.
After these things didn't work, I tried deleting all bitcoin data and install qt wallet. And after I opened qt wallet and accessed console and run "prune 300000" so that it deleted the first 300K blocks (this time I set maximum space usage as 15000MB on qt wallet, still it downloaded 20GB, so I had to run prune command on console). Only then it deleted the first 300k blocks and opened up space.
Please tell me how can I make this daemon & qt wallet automaticly prune the old blockchain data when the current stored chain data reaches to certain amount?
submitted by nithronium to Bitcoin [link] [comments]

Unconfiscatable Bitcoin Conference - Part 25 - Adam Back ... BitcoinInvestor.com - YouTube Unconfiscatable Bitcoin Conference - Part 24 - Jan from ... Bitcoin JSON-RPC Tutorial 3 - bitcoin.conf Unconfiscatable Bitcoin Conference - Part 22 - Daisy Komen ...

To enable block pruning set prune=<N> on the command line or in bitcoin.conf, where N is the number of MiB to allot for raw block & undo data. A value of 0 disables pruning. The minimal value above 0 is 550. Your wallet is as secure with high values as it is with low ones. Bitcoind prune - ed.ccei.it Bitcoind prune Just finished syncing the whole blockchain after days and I realize the bitcoin settings were "pruning", which means I cannot use it as a wallet. is it the normal behavior of bitcoin core v0.19.0... estimaterawfee conf_target Bitcoin Core only stores complete transaction data for UTXOs and your own transactions, so the RPC may fail on historic transactions unless you use the non-default `txindex=1` in your Bitcoin Core startup settings. pruneblockchain "height" Prunes the blockchain up to a specified height or timestamp. There is also no manual pruning UI (`prune=1`). The user will have to use `bitcoin.conf` for those things. Fixes bitcoin#6461. When combined with bitcoin#13029 the user, after pruning their node, can safely reset settings and/or use bitcoind without having to edit `bitcoin.conf`. However I don't think that's an essential prerequisite.

[index] [2487] [14629] [7133] [27400] [14602] [17790] [94] [21400] [15398] [26726]

Unconfiscatable Bitcoin Conference - Part 25 - Adam Back ...

Paul Rosenberg, Daniel Krawisz, Chris Odom, Dimitri “Rassah” , Emory Roane – Moderator Presented at Bitcoin Investor Conference - Oct. 29-30, 2015 Unconfiscatable Bitcoin Conference - Part 22 - Daisy Komen and Joe Saks join - Duration: 41:52. World Crypto Network. 41:52. Unconfiscatable Bitcoin Conference - Part 24 - Jan from Braains joins - Duration: 10:48. World Crypto Network. 10:48. Unconfiscatable Bitcoin Conference - Part 20 - Fun with Crypto Lawyers - Duration: 57:29. World Crypto Network. 57:29. Unconfiscatable Bitcoin Conference - Part 24 - Jan from Braains joins - Duration: 10:48. World Crypto Network. 10:48. Banking on Bitcoin YouTube Movies. 2017 · Documentary; 1:23:41.

Flag Counter