Download The Best Binary Options App - For Windows

Problem installing RetroPie, no option for binaries based installion

I just received my Raspberry Pi 2 today and put Raspbian Jessie on it. It boots fine.
Now I want to install RetroPie through the terminal. I know I can download a prepackaged RetroPie image but I decided to do it this way to also learn more about using the terminal during the process.
I followed the explanation on https://github.com/RetroPie/RetroPie-Setup for what to type in the terminal. According to http://www.instructables.com/id/Installing-RetroPieEmulationStation-onto-Raspberry/step3/Finally-Installing-RetroPieEmulationStation/ after writing sudo ./retropie_setup.sh in the terminal and pressing enter I should get a screen offering me the option to do a binaries based installation of RetroPie. However, I only get the option to do a source based installation: http://imgur.com/rVr1sKC
What have I done wrong? Any help is much appreciated
Edit: Not sure if it matters but I forgot to mention I did expend the file system. Also I changed the overclock setting to the Pi2 default preset and changed the amount of memory available to the GPU to 512
Edit2: Upon re-reading the information on the github I realised that Raspbian Jessie only works with a sourced based installation. I will either install Raspbian Wheezy or just download the prepackaged RetroPie image file
submitted by Tradios to RetroPie [link] [comments]

GUI v0.16.0.2 'Nitrogen Nebula' released!

This is the GUI v0.16.0.2 'Nitrogen Nebula' point release. This release predominantly features bug fixes and performance improvements.

(Direct) download links

GPG signed hashes

We encourage users to check the integrity of the binaries and verify that they were signed by binaryFate's GPG key. A guide that walks you through this process can be found here for Windows and here for Linux and Mac OS X.
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 # This GPG-signed message exists to confirm the SHA256 sums of Monero binaries. # # Please verify the signature against the key for binaryFate in the # source code repository (/utils/gpg_keys). # # ## CLI 8e3ce10997ab50eec2ec3959846d61b1eb3cb61b583c9f0f9f5cc06f63aaed14 monero-android-armv7-v0.16.0.1.tar.bz2 d9e885b3b896219580195fa4c9a462eeaf7e9f7a6c8fdfae209815682ab9ed8a monero-android-armv8-v0.16.0.1.tar.bz2 4f4a2c761b3255027697cd57455f5e8393d036f225f64f0e2eff73b82b393b50 monero-freebsd-x64-v0.16.0.1.tar.bz2 962f30701ef63a133a62ada24066a49a2211cd171111828e11f7028217a492ad monero-linux-armv7-v0.16.0.1.tar.bz2 83c21fe8bb5943c4a4c77af90980a9c3956eea96426b4dea89fe85792cc1f032 monero-linux-armv8-v0.16.0.1.tar.bz2 4615b9326b9f57565193f5bfe092c05f7609afdc37c76def81ee7d324cb07f35 monero-linux-x64-v0.16.0.1.tar.bz2 3e4524694a56404887f8d7fedc49d5e148cbf15498d3ee18e5df6338a86a4f68 monero-linux-x86-v0.16.0.1.tar.bz2 d226c704042ff4892a7a96bb508b80590a40173683101db6ad3a3a9e20604334 monero-mac-x64-v0.16.0.1.tar.bz2 851b57ec0783d191f0942232e431aedfbc2071125b1bd26af9356c7b357ab431 monero-win-x64-v0.16.0.1.zip e944d15b98fcf01e54badb9e2d22bae4cd8a28eda72c3504a8156ee30aac6b0f monero-win-x86-v0.16.0.1.zip # ## GUI d35c05856e669f1172207cbe742d90e6df56e477249b54b2691bfd5c5a1ca047 monero-gui-install-win-x64-v0.16.0.2.exe 9ff8c91268f8eb027bd26dcf53fda5e16cb482815a6d5b87921d96631a79f33f monero-gui-linux-x64-v0.16.0.2.tar.bz2 142a1e8e67d80ce2386057e69475aa97c58ced30f0ece3f4b9f5ea5b62e48419 monero-gui-mac-x64-v0.16.0.2.tar.bz2 6e0efb25d1f5c45a4527c66ad6f6c623c08590d7c21de5a611d8c2ff0e3fbb55 monero-gui-win-x64-v0.16.0.2.zip # # # ~binaryFate -----BEGIN PGP SIGNATURE----- iQIzBAEBCAAdFiEEgaxZH+nEtlxYBq/D8K9NRioL35IFAl8JaBMACgkQ8K9NRioL 35IKbhAAnmfm/daG2K+llRBYmNkQczmVbivbu9JLDNnbYvGuTVH94PSFC/6K7nnE 8EkiLeIVtBBlyr4rK288xSJQt+BMVM93LtzHfA9bZUbZkjj2le+KN8BHcmgEImA8 Qm2OPgr7yrxvb3aD5nQUDoaeQSmnkLCpN2PLbNGymOH0+IVl1ZYjY7pUSsJZQGvC ErLxZSN5TWvX42LcpyBD3V7//GBOQ/gGpfB9fB0Q5LgXOCLlN2OuQJcYY5KV3H+X BPp9IKKJ0OUGGm0j7mi8OvHxTO4cbHjU8NdbtXy8OnPkXh24MEwACaG1HhiNc2xl LhzMSoMOnVbRkLLtIyfDC3+PqO/wSxVamphKplEncBXN28AakyFFYOWPlTudacyi SvudHJkRKdF0LVIjXOzxBoRBGUoJyyMssr1Xh67JA+E0fzY3Xm9zPPp7+Hp0Pe4H ZwT7WJAKoA6GqNpw7P6qg8vAImQQqoyMg51P9Gd+OGEo4DiA+Sn5r2YQcKY5PWix NlBTKq5JlVfRjE1v/8lUzbe+Hq10mbuxIqZaJ4HnWecifYDd0zmfQP1jt7xsTCK3 nxHb9Tl1jVdIuu2eCqGTG+8O9ofjVDz3+diz6SnpaSUjuws218QCZGPyYxe91Tz8 dCrf41FMHYhO+Lh/KHFt4yf4LKc0c048BoVUg6O0OhNIDTsvd/k= =akVA -----END PGP SIGNATURE----- 

Upgrading

Note that, once the DNS records are upgraded, you should be able to utilize the automatic updater in the GUI that was recently added. A pop-up will appear with the new binary.
In case you want to update manually, you ought to perform the following steps:
  1. Download the new binaries (the .zip file (Windows) or the tar.bz2 file (Mac OS X and Linux)) from the direct download links in this thread or from the official website. If you run active AV (AntiVirus) software, I'd recommend to apply this guide -> https://monero.stackexchange.com/questions/10798/my-antivirus-av-software-blocks-quarantines-the-monero-gui-wallet-is-there
  2. Extract the new binaries (the .zip file (Windows) or the tar.bz2 file (Mac OS X and Linux) you just downloaded) to a new directory / folder of your liking.
  3. Open monero-wallet-gui. It should automatically load your "old" wallet.
If, for some reason, the GUI doesn't automatically load your old wallet, you can open it as follows:
[1] On the second page of the wizard (first page is language selection) choose Open a wallet from file
[2] Now select your initial / original wallet. Note that, by default, the wallet files are located in Documents\Monero\ (Windows), Users//Monero/ (Mac OS X), or home//Monero/ (Linux).
Lastly, note that a blockchain resync is not needed, i.e., it will simply pick up where it left off.

Release notes

Point release:
  • Fix bug that inhibited Ledger Monero users from properly sending transactions containing multiple inputs.
  • CMake improvements
  • Minor security relevant fixes
  • Various bug fixes
Major release:
  • Simple mode: node selction algorithm improved
  • UX: display estimated transaction fee
  • UX: add update dialog with download and verify functionality
  • UX: implement autosave feature
  • UI: redesign advanced options on transfer page
  • UI: improve daemon sync progress bar
  • UI: new language sidebar
  • UI: new processing splash design
  • UI: redesign settings page
  • Trezor: support new passphrase entry mechanism
  • Wizard: add support for seed offset
  • Dandelion++
  • Major Bulletproofs verification performance optimizations
  • Various bug fixes and performance improvements
Note that you can find a full change log here.

Further remarks

  • A guide on pruning can be found here.
  • Ledger Monero users, please be aware that version 1.6.0 of the Ledger Monero App is required in order to properly use GUI v0.16.

Guides on how to get started

https://github.com/monero-ecosystem/monero-GUI-guide/blob/mastemonero-GUI-guide.md
Older guides: (These were written for older versions, but are still somewhat applicable)
Sheep’s Noob guide to Monero GUI in Tails
https://medium.com/@Electricsheep56/the-monero-gui-wallet-broken-down-in-plain-english-bd2889b8c202

Ledger GUI guides:

How do I generate a Ledger Monero wallet with the GUI (monero-wallet-gui)?
How do I restore / recreate my Ledger Monero wallet?

Trezor GUI guides:

How do I generate a Trezor Monero wallet with the GUI (monero-wallet-gui)?
How to use Monero with Trezor - by Trezor
How do I restore / recreate my Trezor Monero wallet?

Guides to resolve common issues

My antivirus (AV) software blocks / quarantines the Monero GUI wallet, is there a work around I can utilize?
I am missing (not seeing) a transaction to (in) the GUI (zero balance)
I forgot to upgrade (from CLI or GUI v0.13 to CLI or GUI v0.14) and, as a result, accidentally synced to the wrong (alternative) chain
I forgot to upgrade (from CLI or GUI v0.13 to CLI or GUI v0.14) and created / performed a transaction on the wrong (alternative) chain
Transaction stuck as “pending” in the GUI
How do I move the blockchain (data.mdb) to a different directory during (or after) the initial sync without losing the progress?
I am using the GUI and my daemon doesn't start anymore
My GUI feels buggy / freezes all the time
The GUI uses all my bandwidth and I can't browse anymore or use another application that requires internet connection
How do I change the language of the 25 word mnemonic seed in the GUI or CLI?
I am using remote node, but the GUI still syncs blockchain?

Using the GUI with a remote node

In the wizard, you can either select Simple mode or Simple mode (bootstrap) to utilize this functionality. Note that the GUI developers / contributors recommend to use Simple mode (bootstrap) as this mode will eventually use your own (local) node, thereby contributing to the strength and decentralization of the network. Lastly, if you manually want to set a remote node, you ought to use Advanced mode. A guide can be found here:
https://www.getmonero.org/resources/user-guides/remote_node_gui.html

Adding a new language to the GUI

https://github.com/monero-ecosystem/monero-translations/blob/masteweblate.md
If, after reading all these guides, you still require help, please post your issue in this thread and describe it in as much detail as possible. Also, feel free to post any other guides that could help people.
submitted by dEBRUYNE_1 to Monero [link] [comments]

/r/news [spam filtered] Hello, everyone, did you know Binary options trading, please visit the following website, and feel ease because you do not need to install

/news [spam filtered] Hello, everyone, did you know Binary options trading, please visit the following website, and feel ease because you do not need to install submitted by ModerationLog to ModerationLog [link] [comments]

MAME 0.222

MAME 0.222

MAME 0.222, the product of our May/June development cycle, is ready today, and it’s a very exciting release. There are lots of bug fixes, including some long-standing issues with classics like Bosconian and Gaplus, and missing pan/zoom effects in games on Seta hardware. Two more Nintendo LCD games are supported: the Panorama Screen version of Popeye, and the two-player Donkey Kong 3 Micro Vs. System. New versions of supported games include a review copy of DonPachi that allows the game to be paused for photography, and a version of the adult Qix game Gals Panic for the Taiwanese market.
Other advancements on the arcade side include audio circuitry emulation for 280-ZZZAP, and protection microcontroller emulation for Kick and Run and Captain Silver.
The GRiD Compass series were possibly the first rugged computers in the clamshell form factor, possibly best known for their use on NASA space shuttle missions in the 1980s. The initial model, the Compass 1101, is now usable in MAME. There are lots of improvements to the Tandy Color Computer drivers in this release, with better cartridge support being a theme. Acorn BBC series drivers now support Solidisk file system ROMs. Writing to IMD floppy images (popular for CP/M computers) is now supported, and a critical bug affecting writes to HFE disk images has been fixed. Software list additions include a collection of CDs for the SGI MIPS workstations.
There are several updates to Apple II emulation this month, including support for several accelerators, a new IWM floppy controller core, and support for using two memory cards simultaneously on the CFFA2. As usual, we’ve added the latest original software dumps and clean cracks to the software lists, including lots of educational titles.
Finally, the memory system has been optimised, yielding performance improvements in all emulated systems, you no longer need to avoid non-ASCII characters in paths when using the chdman tool, and jedutil supports more devices.
There were too many HyperScan RFID cards added to the software list to itemise them all here. You can read about all the updates in the whatsnew.txt file, or get the source and 64-bit Windows binary packages from the download page.

MAME Testers Bugs Fixed

New working machines

New working clones

Machines promoted to working

Clones promoted to working

New machines marked as NOT_WORKING

New clones marked as NOT_WORKING

New working software list additions

Software list items promoted to working

New NOT_WORKING software list additions

submitted by cuavas to emulation [link] [comments]

What is the history of when and why /home/ moved out of /usr/ in Linux?

I was looking through the Wikipedia article on home directories when I noticed from playing with FreeBSD the /home/ directory was not a child of the root directory (/ushome/). The article also says the original UNIX os also had the home directory listed as a child of the /us folder
I became curious if anyone here knew the history of why the /home/ directory was moved out of the /us directory
submitted by Anthras to linux [link] [comments]

GUI v0.16.0.0 'Nitrogen Nebula' released!

This is the GUI v0.16.0.0 'Nitrogen Nebula' major release. This release features Dandelion++, major Bulletproofs verification performance optimizations, as well as bug fixes and performance improvements.

(Direct) download links

GPG signed hashes

We encourage users to check the integrity of the binaries and verify that they were signed by binaryFate's GPG key. A guide that walks you through this process can be found here for Windows and here for Linux and Mac OS X.
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 # This GPG-signed message exists to confirm the SHA256 sums of Monero binaries. # # Please verify the signature against the key for binaryFate in the # source code repository (/utils/gpg_keys). # # ## CLI c3f9f41b3fd3c8859d952ac95d9b5ab2cc9ad541a868edf6e9100afff5d4dd7f monero-android-armv7-v0.16.0.0.tar.bz2 06c352fd73307f2757c003eb295152715ef2003323db6367d72b258e512f6cbc monero-android-armv8-v0.16.0.0.tar.bz2 56e68d171d93e2bcea5a7e8eb7f410fcb8fb811c69b6a4f2fad0e15c0a48f6db monero-freebsd-x64-v0.16.0.0.tar.bz2 8aad622b0e562b610b69bc0ed0fab98bc7bfc77352151b9259ef5c8cab9338d0 monero-linux-armv7-v0.16.0.0.tar.bz2 76afab3670df104d392048f52fde92dc611342ca0780690e7e042f1371828acb monero-linux-armv8-v0.16.0.0.tar.bz2 e507943b46e9d7c9ccdb641dcccb9d8205dd9de660a0ab5566dac5423f8b95e2 monero-linux-x64-v0.16.0.0.tar.bz2 1c08139550bbbbe1844cf48b6b1d60385be70072841fcbe5e0614fa628a23604 monero-linux-x86-v0.16.0.0.tar.bz2 8e9382cc509751765ed9601f6ac9d37cdb9e94dd5e541312545430e6617c6850 monero-mac-x64-v0.16.0.0.tar.bz2 f2750efb65b70ae9cad64d977cb0bfbe4dc6d014fe0b7fd565002282d67d469d monero-win-x64-v0.16.0.0.zip b1fc293dd9c12f90c7c343777298e86a22f25788561629b92ec0b23eb6cfb42c monero-win-x86-v0.16.0.0.zip # ## GUI 0820aeb30b39bb86b550ff5d6e641c16491cff3cff2b9ab9873bdc05acc6a041 monero-gui-install-win-x64-v0.16.0.0.exe 6a1064e89d1ac626ae9307429276ad447ddbbf38035de0b24599e267977e61f1 monero-gui-linux-x64-v0.16.0.0.tar.bz2 96effab969c1d4f715d323835d98b202e33f75b835ed4587bb49a76fb288bc6d monero-gui-mac-x64-v0.16.0.0.tar.bz2 f7894e92a8973f9b504fe028dc90a672fc3e97086ab835c346a1ae2dfb0d53cf monero-gui-win-x64-v0.16.0.0.zip # # # ~binaryFate -----BEGIN PGP SIGNATURE----- iQIzBAEBCAAdFiEEgaxZH+nEtlxYBq/D8K9NRioL35IFAl7RQYIACgkQ8K9NRioL 35L1gQ//WCPgogsuG0WpK+XELGh4tDKG2HntjtBhRmoOpHd2sZUauTaFGJQB354I I3XzR4dPtoindHYtfhvV1EyFvoH/hYVN14qEnLD4sBQMyYQ0b/uCjVm1zvwtbsKI R9gDwvl/WhhG4JIeHfl1Jf7DujtOdrN3qAI+mZb0s/SdGiPdwT62uR6QBK55AHEF ISExjyXXIrMu0MzS6mSJJnNZQvzLmr6HdoRoO3y2ckmrVUfyJmDKoyz9taMA4t8T nvPGX2aSsjyDX8/hRSfOHDy3EuQTEmRarUtuVFBFLqrDqvJFZvIc7yawXmQWMO53 N5zbIu3qxbaY+g9v63l7ezswjYKHkN4sutQo/a08Befk0MFSf91k3ekEtSQWgqbR WLrNYY4Lc3inONvM7v/zfWrmEle8cGhjVF7uk65n2t7dCJtIaUMA6krFlyUk5EPm t1wIaFRDPctEJGP1GJJO0agkVgY2KsAh4YoFEYVkrN/w2RfhK7QEaMI0H37jZwSI 8olIXW+vwfBzAg2MIa+let39XC6jGDMvYLnN37nvE7xd2azPihEjmAykEjz1RGiP yRULgH3q/E3Kz7PKblVGmUrBE/CC8JR35mU5tOGjLfHNC3Vm4WOhMT7verQig9BB TnEj22c3+FVsABdKA0+rAvdU5CfN2VkvjP7TWSpTRS4Q/vynwmQ= =Emn9 -----END PGP SIGNATURE----- 

Upgrading

You ought to perform the following steps:
  1. Download the new binaries (the .zip file (Windows) or the tar.bz2 file (Mac OS X and Linux)) from the direct download links in this thread or from the official website. If you run active AV (AntiVirus) software, I'd recommend to apply this guide -> https://monero.stackexchange.com/questions/10798/my-antivirus-av-software-blocks-quarantines-the-monero-gui-wallet-is-there
  2. Extract the new binaries (the .zip file (Windows) or the tar.bz2 file (Mac OS X and Linux) you just downloaded) to a new directory / folder of your liking.
  3. Open monero-wallet-gui. It should automatically load your "old" wallet.
If, for some reason, the GUI doesn't automatically load your old wallet, you can open it as follows:
[1] On the second page of the wizard (first page is language selection) choose Open a wallet from file
[2] Now select your initial / original wallet. Note that, by default, the wallet files are located in Documents\Monero\ (Windows), Users//Monero/ (Mac OS X), or home//Monero/ (Linux).
Lastly, note that a blockchain resync is not needed, i.e., it will simply pick up where it left off.

Release notes

  • Simple mode: node selction algorithm improved
  • UX: display estimated transaction fee
  • UX: add update dialog with download and verify functionality
  • UX: implement autosave feature
  • UI: redesign advanced options on transfer page
  • UI: improve daemon sync progress bar
  • UI: new language sidebar
  • UI: new processing splash design
  • UI: redesign settings page
  • Trezor: support new passphrase entry mechanism
  • Wizard: add support for seed offset
  • Dandelion++
  • Major Bulletproofs verification performance optimizations
  • Various bug fixes and performance improvements
Note that you can find a full change log here.

Further remarks

  • A guide on pruning can be found here.
  • Ledger Monero users, please be aware that a new version of the Ledger Monero App is required in order to properly use GUI v0.16. This release is not yet out, but forthcoming.

Guides on how to get started

https://github.com/monero-ecosystem/monero-GUI-guide/blob/mastemonero-GUI-guide.md
Older guides: (These were written for older versions, but are still somewhat applicable)
Sheep’s Noob guide to Monero GUI in Tails
https://medium.com/@Electricsheep56/the-monero-gui-wallet-broken-down-in-plain-english-bd2889b8c202

Ledger GUI guides:

How do I generate a Ledger Monero wallet with the GUI (monero-wallet-gui)?
How do I restore / recreate my Ledger Monero wallet?

Trezor GUI guides:

How do I generate a Trezor Monero wallet with the GUI (monero-wallet-gui)?
How to use Monero with Trezor - by Trezor
How do I restore / recreate my Trezor Monero wallet?

Guides to resolve common issues

My antivirus (AV) software blocks / quarantines the Monero GUI wallet, is there a work around I can utilize?
I am missing (not seeing) a transaction to (in) the GUI (zero balance)
I forgot to upgrade (from CLI or GUI v0.13 to CLI or GUI v0.14) and, as a result, accidentally synced to the wrong (alternative) chain
I forgot to upgrade (from CLI or GUI v0.13 to CLI or GUI v0.14) and created / performed a transaction on the wrong (alternative) chain
Transaction stuck as “pending” in the GUI
How do I move the blockchain (data.mdb) to a different directory during (or after) the initial sync without losing the progress?
I am using the GUI and my daemon doesn't start anymore
My GUI feels buggy / freezes all the time
The GUI uses all my bandwidth and I can't browse anymore or use another application that requires internet connection
How do I change the language of the 25 word mnemonic seed in the GUI or CLI?
I am using remote node, but the GUI still syncs blockchain?

Using the GUI with a remote node

In the wizard, you can either select Simple mode or Simple mode (bootstrap) to utilize this functionality. Note that the GUI developers / contributors recommend to use Simple mode (bootstrap) as this mode will eventually use your own (local) node, thereby contributing to the strength and decentralization of the network. Lastly, if you manually want to set a remote node, you ought to use Advanced mode. A guide can be found here:
https://www.getmonero.org/resources/user-guides/remote_node_gui.html

Adding a new language to the GUI

https://github.com/monero-ecosystem/monero-translations/blob/masteweblate.md
If, after reading all these guides, you still require help, please post your issue in this thread and describe it in as much detail as possible. Also, feel free to post any other guides that could help people.
submitted by dEBRUYNE_1 to Monero [link] [comments]

Guide: Install macOS 11 (Big Sur) Without Cloning VM

DISCLAIMER: This was tested on a Ryzen CPU. Whilst it is highly likely that this solution will work on Intel machines, expect that it might not work. Also please know that Big Sur is still in beta and is not properly supported yet. It is slow, buggy, and stuff does not work! Install at your own risk for testing purposes only! I am not responsible for loss of data or hardware problems caused by following this guide.
------------------------------------------------------------------------------------------------------------------
Introduction
I had posted about my success with installing Big Sur without cloning a virtual machine earlier today. I thought it may be beneficial to create a guide for those wishing to install Big Sur who have been putting it off due to the complexity of the original method. Thanks to the wizards working on Opencore, the installer now boots and it is now possible to either upgrade to Big Sur or make a clean install. I am aiming the content of this guide to someone who might be new to Opencore, but has made an Opencore Hackintosh before. If you have any issues with your install, please consult the Opencore troubleshooting guide before asking me. I am happy to help with unique issues related to Big Sur.
------------------------------------------------------------------------------------------------------------------
My Hardware
This method should be compatible with any "hackintoshable" device. If you do run into hardware compatibility issues however, here are my hardware specifications.
​CPU: Ryzen 5 1500x
Motherboard: Asus Prime B350 Plus
Graphics: ASUS OC Radeon RX 5500XT 8GB
BIOS Version: 5407
LAN: Realtek PCIe LAN (Essentially the one that works with RTL8111.kext)
Bluetooth/WiFi: N/A
------------------------------------------------------------------------------------------------------------------
What you will need
The biggest thing you are going to need is either a real Mac or a Hackintosh running Catalina. In order to build Opencore and the required kernel extensions, you will need the latest version of Xcode which only runs on Catalina. With that out of the way, here is a list of everything else you need.
------------------------------------------------------------------------------------------------------------------
Guide
So! Once you have either a real Mac or Hackintosh running Catalina, have all the necessary files and applications, and enough time, you are ready to go! If you have already opened your Xcode installation before then skip this part of the guide. Otherwise, read on!
  1. Open Xcode.
  2. Agree to the terms and conditions.
  3. Let Xcode finish installing components.
  4. Then you can quit Xcode, that's all you need to do inside it!
Now you will need to compile the latest source version of Opencore, your required kernel extensions, and drivers. To do this we will need to use Xcode's build tools or OCBuilder. For those who want to just build everything with Xcode in the terminal, see the next part of this section. I only recommend you do this if you know exactly what you are doing as you may run into issues building certain extensions, packages, etc. You will get less bloat from it, but it will be much harder to do. For those wanting to go the easy route and use OCBuilder, keep reading!
With OCBuilder
  1. Open OCBuilder (It will throw a security error so just go into System Preferences > Security and click 'Open Anyway')
  2. On the drop down box where it says "Select Version", make sure Debug is selected.
  3. Click on the checkbox 'With Kexts?' to include the latest common kernel extensions.
  4. Underneath that, click on the 'Choose...' button. Here you will choose a directory to save the finished build to.
  5. Once that is finished, click build! It will take some time, be patient. If it looks like it is locked up it likely isn't, just give it 15-25 minutes. NOTE: The first time you build with OCBuilder it will need to install programs like NASM. When it does, it will prompt you to enter your administrator's password in order to install.
  6. Once the build is completed, navigate to the directory in which OCBuilder saved your build to and take out the 'EFI' folder. Put it somewhere easy to get to like the desktop. This will be the 'EFI' folder you use while following the Opencore guide.
With Xcode (Manual Method)
  1. Firstly, you will need to clone the necessary git repositories. They are linked below...
    1. Opencore - https://github.com/acidanthera/OpenCorePkg
    2. OCBinaryData (Drivers) - https://github.com/acidanthera/OcBinaryData
    3. Kexts - Use Goldfish64's Kext Repo to download the latest extensions
  2. Create a directory that you wish to download the repository too.
  3. Open terminal and navigate to that directory. Type into the terminal git clone 'REPO_LINK _HERE' to download the repository.
  4. You don't need to build anything from OCBinaryData. Just open it and take out the drivers you need.
  5. Navigate to your Opencore download and run build_oc.tool.
  6. Once completed, Opencore will be built to the 'Binaries' directory. Extract the 'DEBUG' zip and take out the EFI folder. This is the EFI you will use to complete the Opencore guide.
    1. NOTE - Opencore may have complaints, when building, about not having programs like NASM installed. You will have to install these dependencies. The build tool should notify you of what those dependencies are.
  7. If you run into any issues with this and can't solve it, use OCBuilder or another application that does all of the necessary tasks for you.
Now you will need to complete the Opencore guide as you would normally do with a Hackintosh install. The method is essentially the same as Catalina, but AMD users have an exception as noted below.
Lastly for this section, you will need to make a decision. Either you will do a clean install or an upgrade. For an upgrade, keep reading. If you are wanting a clean install, keep scrolling until you find the 'CLEAN INSTALL' section. Upgrading is generally not recommended, but it did work for me. You will be taking your chances with an upgrade however.
UPGRADING
  1. Make sure you have already downloaded the Big Sur app as stated under the 'What you will need' section.
  2. Open MountEFI, or your EFI mounting method of choice, and mount the EFI partition of your drive with macOS installed.
  3. Open the EFI partition.
  4. BACKUP YOUR EFI FOLDER! If the EFI folder that you have just made does not work, you will need a way of getting back into the OS. I recommend creating a Catalina USB installer with your original EFI folder in the EFI partition just in case it doesn't work
  5. Once backed up, delete the old EFI folder out of the partition and paste in the new one you created before.
  6. Open up the 'Install Big Sur Beta' app you installed and follow the prompts to install.
  7. Once you have restarted, select the macOS Installer option in Opencore.
  8. The install will take 20-30 minutes.
  9. Your computer will likely restart just before the progress bar reaches the end. When it does, boot from your USB, and select the macOS Installer option in Opencore again. Once your verbose output stops at something like Forcing CS_RUNTIME for entitlement, wait and be patient. This process could take 20 minutes to a few hours! Once you restart, select the 'YOUR_DRIVE_NAME_HERE-Data' option and let it boot. Follow the on-screen prompts to get to the desktop.
  10. Congratulations, you have successfully installed macOS 11 Big Sur on your Hackintosh!
CLEAN INSTALL
  1. Firstly, you will need to create the macOS Big Sur bootable installer. To do this, get your 16gb USB drive and format it in Disk Utility with the following settings.
    1. Name: whatever you like it really doesn't matter
    2. Format: Mac OS Extended (Journaled)
    3. Scheme: GUID Partition Map
  2. FOR BETA 2: Next, open terminal and type in the following command sudo /Applications/Install\ macOS\ Big\ Sur\ Beta.app/Contents/Resources/createinstallmedia --volume /Volumes/VOLUME_NAME_HERE
    1. FOR BETA 1: Next, open terminal and type in the following command sudo /Applications/Install\ macOS\ Beta.app/Contents/Resources/createinstallmedia --volume /Volumes/VOLUME_NAME_HERE
  3. Let the createinstallmedia command do its magic. It might take a bit.
  4. Once that is done, open up MountEFI, or your EFI mounting method of choice, and mount the EFI partition of your USB.
  5. Open the EFI partition you just mounted and copy over the EFI folder you created before into it.
  6. Restart and boot from your USB.
  7. Select either the Install macOS Big Sur Beta, or the Install macOS Beta from the Opencore options, depending on if you created either a Beta 2 or Beta 1 USB.
  8. Install macOS as you would Catalina. Format the drive you will use to install macOS, and then install Big Sur through the on-screen prompts.
  9. It will say '3 minutes remaining for maybe 5-10 minutes', just be patient, it is working!
  10. Once your computer restarts, boot again to your USB and select the 'macOS Installer' option from the Opencore menu.
  11. The install will take roughly 30 minutes. It will likely restart just before the progress bar reaches the end.
  12. Once you restart, select the 'macOS Installer' option again from the Opencore menu. Once your verbose output stops at something like Forcing CS_RUNTIME for entitlement, wait and be patient. This process could take 20 minutes to a few hours! Once you restart, select the 'YOUR_DRIVE_NAME_HERE-Data' option and let it boot. Follow the on-screen prompts to get to the desktop.
  13. Congratulations, you have successfully installed macOS 11 Big Sur on your Hackintosh!
------------------------------------------------------------------------------------------------------------------
Conclusion
Hopefully all of you had some success installing Big Sur. If you had success, leave a comment saying you did! I would love to know how it went. There are some amazing people who worked this extremely complex task. Make sure to give some thanks to IOIIIO on Github for the AMD kernel patches, InsanelyMac user Andrey1970 for the SMC fix, and of course the folks who grind to make Opencore compatible with the latest version of macOS. I am simply compiling this guide to make it easy for everyone to do this. Thank you everyone!
submitted by TheCrazyHoundDog to hackintosh [link] [comments]

Why use Gentoo over Arch?

So
I am a Arch user since a few months. Sometimes Manjaro.
But how does Gentoo make a better distro then Arch with the big AUR? Why would someone like to compile VLC for like 3 hours when you can do it on Arch in seconds.
I am exactly a linux noob in particular anymore, but on uncerstandinf Gentoo I am.
submitted by Flahaut to linux4noobs [link] [comments]

Wine 5.13 Released

The Wine development release 5.13 is now available.
 
https://www.winehq.org/announce/5.13 
 
What's new in this release (see below for details):
 
- Re-mapping of INI files to the registry. - System call thunks in NTDLL. - Reimplementation of floating point numbers printing. - Beginnings of a restructuration of the console support. - Various bug fixes 
 
The source is available from the following locations:
http://dl.winehq.org/wine/source/5.x/wine-5.13.tar.xz http://mirrors.ibiblio.org/wine/source/5.x/wine-5.13.tar.xz 
 
Binary packages for various distributions will be available from:
http://www.winehq.org/download 
 
You will find documentation on
http://www.winehq.org/documentation 
 
You can also get the current source directly from the git repository.
Check
http://www.winehq.org/git for details. 
 
Wine is available thanks to the work of many people.
See the file AUTHORS in the distribution for the complete list.
 
 
Bugs fixed in 5.13 (total 22):
 
4096 IniFileMapping not Implemented (ini on win9x => Registry on NT) 18072 Core Media Player crashes on missing CLSID_DvdGraphBuilder {fcc152b7-f372-11d0-8e00-00c04fd7c08b} (qdvd.dll) 27298 The Witcher 2 Slow Performance on any setting. 28109 winmm capture tests fail on some machines 31023 CuteFTP 8.3.4 - "Encountered an improper argument." Error boxes after most actions. 32215 11game platform crashes at start 36546 Please remove `tmpfs` special treatment in ntdll / MSI packages cannot be installed from `tmpfs` 42874 Battle.net App is unable to update games 44127 Metal Gear Solid V: Ground Zeroes doesn't launch 45701 Warframe: Launcher.exe does not update, keeps relaunching itself 45876 Call of Duty: Black Ops III and Call of Duty: WWII have no mouse input when using native mfplat 47587 Call to Power II: Screen doesn't repaint after selecting main menu option 49092 Blindwrite 7 crashes with a stack overflow 49103 Call of Duty: Modern Warfare 2 Campaign Remastered mouse input is missing 49422 Dungeon Siege 1 & 2 weapons are misplaced 49438 Wine on ARM64 fails with "could not exec the wine loader" unless --enable-win64 is used 49489 Incorrect rendering in Warframe with nvidia 49496 sprintf uses locale specific decimal point when it should not. 49513 Battle.net fails to install World of Warcraft or Starcraft II 49522 Mass Effect: Andromeda doesn't recognize keyboard input since 5.12 49570 LVM_FINDITEM should do case-insensitive test for item text 49573 Sporadic page fault on 64bit prefix creation on macOS 
submitted by catulirdit to linux_gaming [link] [comments]

MAME 0.222

MAME 0.222

MAME 0.222, the product of our May/June development cycle, is ready today, and it’s a very exciting release. There are lots of bug fixes, including some long-standing issues with classics like Bosconian and Gaplus, and missing pan/zoom effects in games on Seta hardware. Two more Nintendo LCD games are supported: the Panorama Screen version of Popeye, and the two-player Donkey Kong 3 Micro Vs. System. New versions of supported games include a review copy of DonPachi that allows the game to be paused for photography, and a version of the adult Qix game Gals Panic for the Taiwanese market.
Other advancements on the arcade side include audio circuitry emulation for 280-ZZZAP, and protection microcontroller emulation for Kick and Run and Captain Silver.
The GRiD Compass series were possibly the first rugged computers in the clamshell form factor, possibly best known for their use on NASA space shuttle missions in the 1980s. The initial model, the Compass 1101, is now usable in MAME. There are lots of improvements to the Tandy Color Computer drivers in this release, with better cartridge support being a theme. Acorn BBC series drivers now support Solidisk file system ROMs. Writing to IMD floppy images (popular for CP/M computers) is now supported, and a critical bug affecting writes to HFE disk images has been fixed. Software list additions include a collection of CDs for the SGI MIPS workstations.
There are several updates to Apple II emulation this month, including support for several accelerators, a new IWM floppy controller core, and support for using two memory cards simultaneously on the CFFA2. As usual, we’ve added the latest original software dumps and clean cracks to the software lists, including lots of educational titles.
Finally, the memory system has been optimised, yielding performance improvements in all emulated systems, you no longer need to avoid non-ASCII characters in paths when using the chdman tool, and jedutil supports more devices.
There were too many HyperScan RFID cards added to the software list to itemise them all here. You can read about all the updates in the whatsnew.txt file, or get the source and 64-bit Windows binary packages from the download page.

MAME Testers Bugs Fixed

New working machines

New working clones

Machines promoted to working

Clones promoted to working

New machines marked as NOT_WORKING

New clones marked as NOT_WORKING

New working software list additions

Software list items promoted to working

New NOT_WORKING software list additions

submitted by cuavas to MAME [link] [comments]

Priiloader 0.9 - Beta 4 released

Hey hey,
Last evening i released Priiloader 0.9 Beta 4 ! this will hopefully be the last beta release before i can release 0.9 as non-beta.
as a recap here is the full 0.9 changelog so far, with the new Beta 4 changes in bold. This release is specifically meant for anyone who had issues with keyboards, hanging or crashes (including using hacks on the wii mini) .

Fixes & Improvements

New Features

sadly, deu to problems with my host, online updating is down for the moment. however, you can still manually download it from github : https://github.com/DacoTaco/priiloadereleases/tag/v0.9-beta.4
enjoy!
submitted by RealDacoTaco to WiiHacks [link] [comments]

A Brief introduction to African Socialism

At the end of the Second World War, Europe realized that their hold on their colonial holdings was slipping fast. Most of them began to draw up plans to gradually grant independence. The people within these countries however had different priorities. They saw their chance to break from the colonial masters and took it. In 1950, only Egypt, Liberia, Ethiopia, and South Africa could be considered independent, by 1965 the vast majority of nations were on their own. Some flourished, some languished, but almost all improved with their newfound freedom.
At this time, the world was locked in a struggle between Western Democracy and Communist Dictatorship. With little warning, a new theater opened in the Cold War. Africans were given the decision of who to side with. As an enemy of their former masters, the Soviet Union made a natural ally, and Socialism's anti-imperial (theoretic) stance appealed to people in post imperial regions of the world. Since independence, seventeen African nations have had a government which self-identified as socialist, six of those as Marxist-Leninist. Like Africa itself, socialist movements in the continent were varied and diverse. Ranging from self described socialist Nelson Mandella becoming celebrated world wide for his devotion to peace and equality to Ethiopian dictator Mengistu Haile Mariam, whose violence and economic mismanagement killed thousands.
The purpose of this post is to describe the ideological origins and tenets of African socialism, with a look at what makes it distinct from mainstream Communist movements. On this map red shows those states which identified as Marxist, yellow shows those which identified as with a variety of other forms of socialism, and green shows those which more closely fall under the Arab Socialist movement and will not be discussed here.

Ideological Origins

Broadly speaking, African Socialism drew inspiration from two main sources, the traditional body of socialist literature and that of the Pan-African movement.
Socialism
Both the ideological tenets of socialism and the practical concerns socialist nations played a role in African nations adopting socialism. Most of the nations of Africa were in a struggle for freedom from capitalist European countries and found a natural ally in the Soviet Union. Following WWII, it was in many ways a binary choice to side with the US or USSR. Those who led rebellions or coups against US backed leaders had few options other than the USSR.
Political concerns aside, there were many reasons why socialism was ideologically attractive to educated Africans. Socialism is at its base revolutionary. "Let the ruling classes tremble at a Communistic revolution. The proletarians have nothing to lose but their chains. They have a world to win. Workingmen of all countries unite!” With even a cursory glance at Marx, it doesn't take m